Mechanics of Materials
The MS12 metal material fatigue testing experimental device is a key equipment used in material mechanics experiments to study the failure behavior of materials under alternating loads.
MS12 focuses on "cumulative damage". Reveal why metal components suddenly fracture after thousands of cycles under stress far below the yield limit. The core goal is to draw S-N curves (stress life curves), determine the fatigue limit of materials, and observe the typical characteristics of fatigue fracture surfaces.
Share:
Added to cart successfully
Experimental feature
1.Drawing of S-N curve (stress life curve)
2.Determination of fatigue limit
3.Symmetrical cyclic bending fatigue test
4.The effect of stress concentration on fatigue life
5.Research on Surface State and Size Effect (Advanced Function)
Product Attributes
|
Product Model |
MS12 |
Product Name |
Rotating fatigue testing experimental device |
|
Main Materials |
Aluminum, carbon steel |
Dimensions | ≤1000×400×1000mm |
|
Product Weight |
20kg |
Operating Environment |
Room temperature, relative humidity ≤ 85% |
|
Input Power Supply |
None | ||
|
Required Modules |
None |
Optional Modules |
None |
Case Studies
Integrated Thermal Fluids and Energy Laboratory at Zhejiang University of Technology
Flight Demonstration Wind Tunnel at Shandong University
Multi Energy Complementary Experimental Platform at Hebei University
Statically Determinate Beam Section Internal Force Testing Apparatus Delivered to Jining Vocational and Technical College
Self Developed Compression Bar Stability and Stress Testing Apparatus Delivered to Shandong Polytechnic University
01
Integrated Thermal Fluids and Energy Laboratory at Zhejiang University of Technology
MicroNewton has equipped a five zone integrated teaching laboratory at Zhejiang University of Technology. The space covers heat transfer, thermodynamics, fluid mechanics, combustion, and multi energy systems with touchscreen stations for energy and power engineering programs.
Learn More
02
Flight Demonstration Wind Tunnel at Shandong University
MicroNewton has delivered a flight demonstration wind tunnel to Shandong University. Students operate a control stick to fly a NACA airfoil model in a subsonic flow, with a digital twin display showing lift, angle of attack, stall, and stability as they happen.
Learn More
03
Multi Energy Complementary Experimental Platform at Hebei University
MicroNewton has delivered an integrated multi energy complementary experimental platform to Hebei University of Engineering. The platform combines solar, wind, hydrogen, thermal storage, and heat pump training equipment in one source, storage, and load network for student laboratories.
Learn More
04
MicroNewton delivers self developed MST01 statically determinate beam section internal force testing apparatus to Jining Vocational and Technical College. This structural mechanics teaching equipment physically implements the section method to measure beam shear force and bending moment. It supports superposition principle verification and error analysis, suitable for civil engineering mechanical engineering and bridge related students at vocational and technical education institutions.
Learn More
05
MicroNewton self developed MS10 compression bar stability and stress testing apparatus has been delivered to Shandong Polytechnic University. This teaching device enables students to observe column buckling, measure critical load and verify Euler formula with configurable end supports. It serves civil engineering and mechanical engineering students, helping them distinguish strength failure from stability failure and compare real experimental data against theoretical material mechanics formulas.
Learn More
