Product Introduction：
The experimental equipment consists of replaceable heating rods, condensation chambers, cooling coils, organic solvents, pressure gauges, etc. Configure a constant temperature water bath to provide cooling water. Measure relevant parameters using the TH100 heat transfer basic experimental platform. During the experiment, the organic solvent is heated to boiling state by a bottom heater, and phenomena such as convective boiling, nucleate boiling, and film boiling during boiling can be observed through a transparent glass container; The steam generated by boiling enters the upper water cooling device, and there is low-temperature cooling water in the cooling coil. The cooling water liquefies the steam and returns to the liquid below, circulating back and forth to achieve the circulation of internal organic solvents.
detailed information
| PRODUCT MODEL | TH111 | product name | Boiling Heat Transfer Experiment Module |
| Product specifications | product material | ||
| Usage environment | Room temperature, relative humidity ≤ 85% | Input power supply | 220V±5%，50Hz |
| Belonging series | Heat Transfer | Cooperate with modules | TH100 |
| Experimental function： |
| 1、Demonstrate convective boiling, nucleate boiling, and film boiling phenomena 2、Study on heat flux density and surface heat transfer coefficient under constant pressure 3、Study the effect of pressure on critical heat flux density 4、Demonstrate the measurement of film condensation and total heat transfer coefficient |